Legrand DS4000 Forward Facing Activation Plates Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Legrand DS4000 Forward Facing Activation Plates. Legrand DS4000 Forward Facing Activation Plates User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
DS4000 Forward Facing
Activation Plates
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 43265 – December 2005
Wiremold / Legrand Electrical Systems conform to and should be
installed and properly grounded in compliance with requirements
of the current National Electrical Code, Canadian Electrical
Code, or codes administered by local authorities.
All electrical products may represent possible shock or fire
hazard if improperly installed or used. Wiremold electrical
products are UL listed to U.S. and Canadian safety
standards, made for interior use only, and should be installed
in conformance with current local and/or the National
Electrical Code.
j
Step 1. Identify the locations along the DS4000 Series Raceway Base where activations are needed.
Products Covered: DS4047D, DS4047R, DS4047C, DS4047MAB
Installed DS4000 Raceway Base
DS4000WC Wire Management Clips
(included with DS4000 Series Raceway Base).
Step 2. Wire and mount Device to Mounting Bracket. Hook
Device Mounting Bracket into outer edge of Raceway
Base. Rotate Bracket down and snap bottom of
Bracket into place.
Hook Bracket into
Raceway Base.
A #10-32 Ground Screw is provided
on all Device Brackets.
Rotate Bracket down and
snap into place.
For more information, visit www.wiremold.com/ds4000.
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1

DS4000 Forward FacingActivation PlatesINSTALLATION INSTRUCTIONSInstallation Instruction No.: 43265 – December 2005Wiremold / Legrand Electrical Syst

Pagina 2

Step 4. Snap Activation Plate onto Raceway Base.Step 5. Installation complete. (DS4047R shown.)Step 3. Allow a 5 1/2" [140mm] maximum gapbetween

Pagina 3

DS4047DDS4047MAB – No Bracket requiredDS4047CStep 1. Install Mounting Bracket, then Faceplate. WireDevice and then mount as shown, screwing throughthe

Pagina 4

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6

Comentarios a estos manuales

Sin comentarios