Legrand Evolution Series Work Surface Portal Manual de usuario descargar pdf (Pagina 2)

FLUSH INSTALLATION (continued):

Step 3. Insert Evolution Series Work Surface Portal into

opening in the table, and orient as desired.

MOUNTING & WIRING (Flush & Surface Models):

Step 1. Insert mounting clip into slot that is appropriate for

the table thickness, and tighten thumb screw.

Accommodates table thicknesses between 3/4"

[19mm] and 3 1/4" [82mm].

Step 2. Install Extron Electronics MAAP devices (Not

provided) using screws provided with the devices.

Step 2. Using a jigsaw, cut along the inside edge of the

routed recess to remove the center.

Step 3. Make wiring connections to AV devices and data

connectors. Utilize the slots on the underside of the

Evolution Series Work Surface Portal to provide

strain relief for the cables.

Step 4. If additional protection for the work surface is

desired, apply adhesive-backed bumper to cover

in location indicated.

1 2 3 4

Sin comentarios

Legrand Evolution Series Work Surface Portal Manual de usuario Pagina 2