Legrand PN03 Eclipse Workstation Raceway Manual de usuario descargar pdf

Eclipse Workstation Raceway

INSTALLATION INSTRUCTIONS

Wiremold

Electrical Systems conform to and should be installed

and properly grounded in compliance with requirements of the

current National Electrical Code or codes administered by local

authorities. All electrical products may represent a possible

shock or fire hazard if improperly installed or used. Wiremold

electrical products are UL Listed, made for interior use only and

should be installed by qualified electrical people in conformance

with current local and/or the National Electrical Code.

16"

Use a #8 (5/16" [7.9mm] head size) pan head fastener or equivalent to attach fittings to mounting surface.

Utilisez une attache a tete panoramique de calibre 8 [tete de 7,9mm (5/16")] ou une fixation equivalente pour

assujettir les raccords a la surface de montage.

Use un sujetado de cabeza plana #8 (5/16" tamaño de cabeza 7.9mm) o su equivalente para unir las instalaciones

a la superficie de montaje.

The adhesive on the PN03, PN05 and PN10 is intended to be used as an installation aid for positioning the

product. Applications with power wire, screw fasteners must be used in addition to the adhesive. Applications with

communication cable only, screw fasteners are not required but are recommended in addition to the adhesive.

L’adhésif qui se trouve sur les modèles PN03, PN05 et PN10 permet de positionner correctement le produit

lors de l’installation. Applications avec fil électrique : des vis d’assemblage doivent être utilisées en plus de l’adhésif.

Applications avec câble de communication seulement : des vis d’assemblage ne sont pas requis mais peut etre

recommandées en plus de l’adhésif.

El adhesivo del PN03, PN05 y el PN10 está destinado a usarse como una ayuda para colocar el producto.

En aplicaciones con cable de corriente debe usarse sujetadores de tornillo además del adhesivo. En aplicaciones con cable

de comunicaciones solamente, se recomienda (noes requerido) el uso de sujetadores de tornillo además del adhesivo.

1 2

Eclipse Workstation RacewayINSTALLATION INSTRUCTIONSWiremold®Electrical Systems conform to and should be installedand properly grounded in compliance

41971 1200RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONSCABLE/WIRE SIZEO.D. PN03L PN05A/PN05L PN10A/PN10Linches [mm] 20% fill* 40% Fill** 20

Modelos relacionados PN05 Eclipse Workstation Raceway | PN10 Eclipse Workstation Raceway |

Sin comentarios