Legrand SPDU8-1U User Manual Manual de usuario descargar pdf (Pagina 14)

5.4 TCP/IP Network Configuration Menu:

This is a submenu of System Main Menu.

• Obtain IP using DHCP: Enable or disable DHCP. The

purpose of using DHCP (Dynamic Host Configuration Protocol)

is to assign dynamic IP addresses to a computer or a network

device on a network. There must be a DHCP server on a

network running and the server must permit an assigned

computer or network device to be on the LAN. If

this option is disabled on the NP systems, the system will not

send DHCP requests to a network.

• Fallback to static IP (if DHCP server no offer): Define a

static IP address. If DHCP is disabled on the system, there

is no DHCP server running on a network, or a DHCP server

refuses IP offering, you have the option to whether either allow

the system to use a static IP address or not.

• Static IP Address: A static IP Address is an IP address

that never changes. This IP address will be used if a DHCP

server IP has no IP offered or DHCP automatic IP address

is disabled.

• Subnet Mask: Defines a static subnet mask that is a part of

your static network address settings. This entry is for your IP

network class, which is distinguished by using a subnet mask.

• Gateway IP address: Specifies a gateway IP address that is a

part of your static network address settings. This is your

router's IP address.

• HTTP Port Number: Specifies a HTTP port number. Default

value is 80.

• Telnet Port Number: Specifies a Telnet port number. Default

value is 23.

• POP3 Email Server: Specifies POP (incoming Email)

server address. The system supports POP3 Internet Email

Protocols, not web based Email services. “mail.wiremold.com”

and “pop.tom.com” are examples of POP Email servers. Make

sure that the POP server you use does not require log on

secure password authentication.

• SMTP Email Server: Specifies SMTP (outgoing Email)

server address. This server will be used for you to send

outgoing (reply) Emails. “mail.wiremold.com” and

“smtp.tom.com” are examples of SMTP Email servers. NP

supports SMTP log on secure password authentication option.

Helpful Info: Use the command “emailget” to immediately

check incoming emails.

• Incoming Email Account Name: Specifies email address that

the system receives. This email account name is also used for

outgoing (replying) emails.

• Incoming Email Account Password: The Email account

password is specified in this entry. This password is also used

for outgoing (replying) emails.

• 2nd Outgoing (Replying) Email Address: This is an

additional outgoing reply email address. The system always

send replying email to the sender. There is no limitation of

types of destination email servers, whether a web based

emailing system or SMTP. Examples of destination addresses

are [email protected]

and [email protected].

Helpful Info: Use the command “emailsend” to immediately

send an outgoing test email.

• Reply (Outgoing) Email Authentication: If an SMTP

(outgoing) email requires a user name and password

authentication, enter “Y” for this entry.

Helpful Info: Use command “emailget” to immediately

check incoming emails.

• Check Email Interval: This entry specifies how often the

system checks incoming emails. The minimum interval is one

minute.

• Access Control List (ACL) Enable: Enable or disable for

controlling client IP addresses to access the system.

• Network Connection Check Using This IP: This entry

specifies an IP address or a URL site that the NP system will

ping periodically for verification of network connectivity. If the

network connection is down or inactive, AutoPing is in off

mode. If this entry leaves blank, network gateway IP address

will be used.

Figure 20 - TCP/IP Network Configuration Menu (Web Page)

************************************************************

* *

* Network Configuration Menu *

************************************************************

>1) Obtain IP using DHCP...................Y

2) Fallback to static IP(if DHCP failed)..Y

3) Static IP Address......................192.168.1.100

4) Subnet Mask............................255.255.255.0

5) Gateway IP Address.....................192.168.1.1

6) Set DNS Server IP Manually (Y/N).......N

7) Primary DNS IP Address.................0.0.0.0

8) Secondary DNS IP Address...............0.0.0.0

9) HTTP Port number(default 80, see note).80

10) Telnet Port Number(default 23).........23

11) POP3 Port

Number(default 110)..........110

12) SMTP Port Number(default 25)...........25

13) POP3 Email Server......................Undefined

14) SMTP Email S e r ver......................Undefined

15) Incoming Email Account Name............Undefined

16) Incoming Email Password................******

17) 2nd outgoing(replying) Email Address...

18) Outgoing Email Authentication..........Y

19) Checking Email Interval(M inute)........2

20) Access Control List(ACL) Enable (Y/N)..N

21) Network Connection Check Using This IP..

[Leave 21) blank if Gateway IP is used. Applicable to AutoPing Mode.]

s) Save.

q) Quit.

Note - Requires system reboot, if the parameter changes .

Please enter your selection:

Figure 19 - Network Configuration Menu (Terminal Screen)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Comentarios a estos manuales

Sin comentarios

Legrand SPDU8-1U User Manual Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Legrand SPDU8-1U User Manual