Legrand Vista Series Archtectural Columns Manual de usuario descargar pdf

Vista

™

Series

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 42140R1 – Updated February 2003

Wiremold Electrical Systems conform to and should be installed

and properly grounded in compliance with requirements of the

current National Electrical Code, Canadian Electrical Code or

codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are cUL Listed, made for interior use only, and should

be installed in conformance with current local and/or the National

Electrical Code.

T-Bar Adapter

Threaded

Rod

Floor Trim

Level

Floor

Gripper Pad

Remove Ceiling tile from the grid if present.

For installation with a suspended ceiling. Use

the included T-bar adapter. Slide fitting over outside

channel and tighten as shown. Position T-bar clamp

over grid tee and tighten with thumbscrew.

For tying into ceilings

without suspended

grids. Use 3/8" [9.5mm]

threaded rod (not

included). Secure

to top plate using

provided knockouts

and appropriate

nuts. Attach to

ceiling structure.

Locate and attach

floor trim piece to

main support with the

four pan head screws

provided. Use

provided floor gripper

pads to secure to

floor. Use both pieces

for hard flooring. For

use with carpet use

only the coarse

portion of the pad.

Make certain

Vista Unit is

correctly oriented

and plumb before

securing to floor.

For more permanent

mounting. Remove

provided knockouts

from steel base support.

Locate and attach floor

trim piece to main

support with the four

pan head screws

provided. Drive four

screws (not provided)

through trim piece and

into flooring. Minimum

recommended screws

size #8 x 1" [7.9mm

head size x 25mm].

Use proper hardware

for specific flooring

materials. Make certain

the Vista Unit is correctly

oriented and plumb

before securing

to floor.

Floor Trim

Level

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

Vista™SeriesINSTALLATION INSTRUCTIONSInstallation Instruction No.: 42140R1 – Updated February 2003Wiremold Electrical Systems conform to and should

Pagina 2

4. The Vista Unit has numerous wiring options. Both inside andoutside channels can be used for wiring in any combinationrequired. Wiring in outside ch

Pagina 3

For attaching to ceiling grid. An extension add-on accessoryallows the Vista Series to beused with ceilings up to 15'[4.6m]. Assemble the outertu

Pagina 4

The Wiremold CompanyU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233

Pagina 5 - Gamme Vista

12a2bAdaptador de barra en TAdaptateur à profilés en TVarilla roscadaTige filetéeAcabado de pisoPatte degarnitureNivelNiveauAlmonhadillasujetadora de

Pagina 6

4. La Unidad Vista cuenta con diversas opciones de cableado. Los canales internos y externospueden usarse para cableado en cualquier combinación reque

Pagina 7

Instalación en techos sin rejillas suspendidas. Un aditamentode extensión permite que la Unidad Vista se use en techos conuna altura máxima de 4.6 m (

Pagina 8

*El rango de capacidad se calcula con base en el 40% del área de la canaleta de acuerdo con lo establecido en una modificación propuesta a la Norma de

Comentarios a estos manuales

Sin comentarios

Legrand Vista Series Archtectural Columns Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Legrand Vista Series Archtectural Columns. Legrand Vista Series Archtectural Columns User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Legrand Vista Series Archtectural Columns