Legrand RC4KTCBK Manual de usuario descargar pdf (Pagina 2)

Step 5. Guide replacement receptacle brackets into Step 6. Attach trim ring to bracket with four screws

place. Direct wire leads through indicated provided. Attach trim ring to receptacle

opening to junction box below. bracket with two screws provided.

Important: Receptacle bracket slides

into the tabs shown here.

Step 7. Place gasket support on receptacle bracket. Step 8. Place slide holder on assembly, lining

Place internal gasket on gasket support and up the “A” and “B” indicators on the

press around edge to seat the gasket into trim ring and the slide holder. Fasten

the groove in the trim ring. with two screws provided.

CAUTION: Gasket must be set in place to provide scrub water seal.

Screws Provided

Two Screws Provided

Wire Path to

Junction Box

NOTE: Be certain to line up the trim

ring with the holes on the

receptacle bracket. The trim

ring only attaches one way.

Important: Letter indicators

need to be lined

up for correct

circuit identification.

1 2 3 4

Sin comentarios

Legrand RC4KTCBK Manual de usuario Pagina 2